qpi-config¶

qpi-config is a tool for configuring Quectel Pi H1 single-board computer. It supports the following functions:

On-board LED configuration¶

Run the following command to configure the operating mode:

sudo qpi-config led mode <blue|green|red> <heartbeat|none>

Run the following command to configure the brightness:

sudo qpi-config led brightness <blue|green|red> <0-511>

Run the following command to configure the fan speed:

sudo qpi-config fan set speed <0-255>

First modify the configuration file /etc/qpi-config/qpi-config.ini, and then run the following command to apply the configuration:

sudo qpi-config 40pin set

Run the following command to query module temperatures:

sudo qpi-config dump temperature

Run the following command to query system CPU, memory, and storage status:

sudo qpi-config dump systemusage

Run the following command to scan for available Wi-Fi networks:

sudo qpi-config wifi scan

Run the following command to view existing Wi-Fi connections:

sudo qpi-config wifi show

Run the following command to check the Wi-Fi connection status:

sudo qpi-config wifi dump <connection uuid>

Run the following command to add Wi-Fi connection:

sudo qpi-config wifi connect <ssid> <password>

After successful connection, the corresponding wireless network status will be displayed as Connected, and the Wi-Fi connection icon will appear in the upper right corner.

Run the following command to delete Wi-Fi connection:

sudo qpi-config wifi remove <connection uuid>